to our customers, old company name in catalogs and other documents on april 1 st , 2010, nec electronics corporation merged with renesas technology corporation, and renesas electronics corporation took over all the business of both companies. therefore, although the old company name remains in this document, it is a valid renesas electronics document. we appreciate your understanding. renesas electronics website: http://www.renesas.com april 1 st , 2010 renesas electronics corporation issued by: renesas electronics corporation ( http://www.renesas.com ) send any inquiries to http://www.renesas.com/inquiry .
notice 1. all information included in this document is current as of th e date this document is issued. such information, however, is subject to change without any prior notice. before purchasing or using any renesas electronics products listed herein, please confirm the latest product information with a renesas electronics sales office. also, please pay regular and careful attention to additional and different information to be disclosed by renesas electronics such as that disclosed through our website. 2. renesas electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property ri ghts of third parties by or arising from the use of renesas electronics products or technical information described in this document . no license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property right s of renesas electronics or others. 3. you should not alter, modify, copy, or otherwise misappropriate any renesas electronics product, whether in whole or in part . 4. descriptions of circuits, software and other related information in this document are provided only to illustrate the operat ion of semiconductor products and application examples. you are fully responsible for the incorporation of these circuits, software, and information in the design of your equipment. renesas electronics assumes no responsibility for any losses incurred by you or third parties arising from the use of these circuits, software, or information. 5. when exporting the products or technology described in this document, you should comply with the applicable export control laws and regulations and follow the procedures required by such laws and regulations. you should not use renesas electronics products or the technology de scribed in this document for any purpose re lating to military applications or use by the military, including but not limited to the development of weapons of mass destruction. renesas electronics products and technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable domestic or foreign laws or regulations. 6. renesas electronics has used reasonable care in preparing the information included in this document, but renesas electronics does not warrant that such information is error free. renesas electronics assumes no liability whatsoever for any damages incurred by you resulting from errors in or om issions from the information included herein. 7. renesas electronics products are classified according to the following three quality grades: ?standard?, ?high quality?, an d ?specific?. the recommended applications for each renesas electronics product depends on the product?s quality grade, as indicated below. you must check the quality grade of each renesas electronics product before using it in a particular application. you may not use any renesas electronics product for any application categorized as ?specific? without the prior written consent of renesas electronics. further, you may not use any renesas electronics product for any application for which it is not intended without the prior written consent of renesas electronics. renesas electronics shall not be in any way liable for any damages or losses incurred by you or third parties arising from the use of any renesas electronics product for a n application categorized as ?specific? or for which the product is not intended where you have failed to obtain the prior writte n consent of renesas electronics. the quality grade of each renesas electronics product is ?standard? unless otherwise expressly specified in a renesas electronics data sheets or data books, etc. ?standard?: computers; office equipment; communications equipment; test and measurement equipment; audio and visual equipment; home electronic appliances; machine tools; personal electronic equipment; and industrial robots. ?high quality?: transportation equipment (automobiles, trains, ship s, etc.); traffic control systems; anti-disaster systems; an ti- crime systems; safety equipment; and medical equipment not specifically designed for life support. ?specific?: aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical equipment or systems for life support (e.g. artificial life support devices or systems), surgical implantations, or healthcare intervention (e.g. excision, etc.), and any other applications or purposes that pose a direct threat to human life. 8. you should use the renesas electronics products described in this document within the range specified by renesas electronics , especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. renesas electronics shall have no liability for malfunctions o r damages arising out of the use of renesas electronics products beyond such specified ranges. 9. although renesas electronics endeavors to improve the quality and reliability of its products, semiconductor products have specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. fur ther, renesas electronics products are not subject to radiation resistance design. please be sure to implement safety measures to guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a renesas electronics product, such as safety design for hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. because the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system manufactured by you. 10. please contact a renesas electronics sales office for details as to environmental matters such as the environmental compatibility of each renesas electronics product. please use re nesas electronics products in compliance with all applicable laws and regulations that regulate the inclusion or use of c ontrolled substances, including without limitation, the eu rohs directive. renesas electronics assumes no liability for damages or losses occurring as a result of your noncompliance with applicable laws and regulations. 11. this document may not be reproduced or duplicated, in any fo rm, in whole or in part, without prior written consent of renes as electronics. 12. please contact a renesas electronics sales office if you have any questions regarding the information contained in this document or renesas electronics products, or if you have any other inquiries. (note 1) ?renesas electronics? as used in this document means renesas electronics corporation and also includes its majority- owned subsidiaries. (note 2) ?renesas electronics product(s)? means any product developed or manufactured by or for renesas electronics.
rev.4.00 mar 10, 2006 page 1 of 7 ha17324a series quad operational amplifier rej03d0674-0400 rev.4.00 mar 10, 2006 description ha17324a series are quad operational amplifier that provide high gain and internal phas e compensation, with single power supply. they can be widely used to control equipments. features ? wide range of supply voltage, and single power supply used ? internal phase compensation ? wide range of common mode voltage, and possible to operate with an input about 0 v ? low electro-magnetic susceptibility level output offset voltage vs. input interference measurement condition output offset voltage (arb. unit) 5.0 4.0 3.0 2.0 1.0 0 ? 1.0 100e+3 1e+6 10e+6 100e+6 1e+9 10e+9 input rf frequency (hz) ha17324a series ha17324 series rs ? + rs 0.01 vin ? 10 dbm rf signal source (for quasi-rf noise) vcc = +7.5 v vee = ? 7.5 v rf rf vout (= 100 ? vio) v _ improve- ment ordering information type no. application package name package code ha17324a dip-14 pin prdp0014ab-b ha17324af sop-14 pin (jeita) prsp0014df-b ha17324arp sop-14 pin (jedec) prsp0014de-a ha17324at commercial use tssop-14 pin ptsp0014ja-b
ha17324a series rev.4.00 mar 10, 2006 page 2 of 7 pin arrangement vout1 vin( ? )1 vin(+)1 v cc vin(+)2 vin( ? )2 vout2 vout4 vin( ? )4 vin(+)4 v ee vin(+)3 vin( ? )3 vout3 ? 1 + 2 (top view) 1 3 2 3 4 5 6 7 14 13 12 11 10 9 8 + 4 ? ? + + ? circuit schematic (1/4) q 1 q 4 q 2 q 3 q 5 q 6 q 7 q 13 q 12 q 11 q 10 q 8 q 9 vout r 1 vin(+) vin( ? ) c note: if input/output terminals voltage over the absolute maximum ratings, there is possibility of mis-operation, characteristics deterioration and destruction, because of the current?s flowing to parasitic diode in ic. the input/output terminals are recommended to be protected with the clamp circuit which using the diode with low forward voltage (like schottky barrier diode) when there is a possibility for the input/output terminals voltage exceeds the absolute maximum ratings.
ha17324a series rev.4.00 mar 10, 2006 page 3 of 7 absolute maximum ratings (ta = 25 c) item symbol ratings unit power supply voltage v cc 32 v output sink current iosink 50 ma common mode input voltage v cm ? 0.3 to +v cc v differential input voltage vin(diff) v cc v output voltage vout ? 0.3 to +v cc v dip 625 * 2 sop 625 * 3 allowable power dissipation tssop p t 400 * 4 mw operating temperature topr ? 40 to +85 c storage temperature tstg ? 55 to +125 c notes: 1. ha17324a: this is the allowable values up to ta = 50c. derate by 8.3 mw/c. 2. ha17324af/arp: when it is mounted on glass epoxy board of 40 mm 40 mm 1.6 mmt with 10% wiring density, value at ta 25 c. if ta > 25 c, derated by 6.25 mw/ c. when it is mounted on glass epoxy board of 40 mm 40 mm 1.6 mmt with 30% wiring density. if ta > 32 c, derated by 6.70 mw/ c. 3. ha17324at: these are the allowable values up to ta = 25 c. derate by 4 mw/ c above that temperature. electrical characteristics (v cc = +15 v, ta = 25 c) item symbol min typ max unit test conditions input offset voltage v io ? 2 7 mv v cm = 7.5 v, r s = 50 ? , rf = 50 k ? input offset current i io ? 5 50 na v cm = 7.5 v, i io = | i i (?) ? i i (+) | input bias current i ib ? 30 500 na v cm = 7.5 v power source rejection ratio psrr ? 93 ? db f = 100 hz, r s = 1 k ? , rj = 100 k ? voltage gain a vd 75 90 ? db r s = 1 k ? , rf = 100 k ? , r l = common mode rejection ratio cmr ? 80 ? db r s = 50 ? , rf = 5 k ? common mode input voltage range v cm ? 0.3 ? 13.5 v r s = 1 k ? , rf = 100 k ? , f = 100 hz maximum output voltage v op-p ? 13.6 ? v f = 100 hz, r s = 1 k ? , rf = 100 k ? , r l = 20 k ? output source current iosource 20 40 ? ma v in + = 1 v, v in ? = 0 v, v oh = 10 v output sink current iosink 10 20 ? ma v in = 0 v, v in = 1 v, v ol = 2.5 v supply current i cc ? 0.8 2 ma v in = gnd, r l = slew rate sr ? 0.19 ? v/ s f = 1.5 khz, v cm = 7.5 v, r l = channel separation * 1 cs ? (120) ? db f = 1 khz 15 50 ? a v in + = 0 v, v in ? = 1 v, v ol = 200 mv output sink current iosink 3 9 ? ma v in + = 0 v, v in ? = 1 v, v ol = 1 v v oh1 13.2 13.6 ? v i oh = ?1 ma output voltage v oh2 12.0 13.3 ? v i oh = ?10 ma v ol1 ? 0.8 1.0 v i ol = 1 ma output voltage v ol2 ? 1.1 1.8 v i ol = 10 ma note: 1. design spec.
ha17324a series rev.4.00 mar 10, 2006 page 4 of 7 characteristic curves output source current vs. ambient temperature 80 output source current iosource (ma) ambeint temperature ta ( c) 70 60 50 40 30 20 10 0 ? 20 0 20 40 60 80 v cc = 15 v v oh = 10 v input bias current vs. ambient temperature 80 input bias current i ib (na) ambeint temperature ta ( c) 70 60 50 40 30 20 10 0 ? 20 0 20 40 60 80 v cc = 15 v v cm = 7.5 v supply current vs. supply voltage 4 supply current i cc (ma) supply voltage v cc (v) 3 2 1 0 816243240 ta = 25 c 80 input bias current i ib (na) supply voltage v cc (v) 60 40 20 0 816243240 ta = 25 c voltage gain vs. supply voltage 160 voltage gain a vd (db) supply voltage v cc (v) 120 80 40 0 816243240 ta = 25 c r l = maxlmum output voltage vs. frequency input bias current vs. supply voltage 20 maximum output voltage v op - p (v) frequency f (hz) 1 k 3 k 10 k 30 k 100 k 300 k 16 12 8 4 0 v cc = 15 v ta = 25 c r l = 20 k ? 1 m
ha17324a series rev.4.00 mar 10, 2006 page 5 of 7 voltage gain vs. frequency v cc = 15v ta = 25 c r l = voltage gain a vd (db) 120 100 80 60 40 20 0 1 3 10 30 100 300 1 k 3 k 10 k 30 k 100 k 300 k 1 m frequency f (hz) v cc = 15v ta = 25 c r s = 50 ? 120 100 80 60 40 20 0 100 300 1 k 3 k 10 k 30 k 100 k 300 k 1m frequency f (hz) common mode rejection ratio vs. frequency common mode rejection ratio cmr (db)
ha17324a series rev.4.00 mar 10, 2006 page 6 of 7 package dimensions ( ni/pd/au plating ) 7.62 max nom min dimension in millimeters symbol reference 19.2 6.3 5.06 a 1 z b 3 d e a b p c e l e 1 0.51 0.56 1.30 0.19 0.25 0.31 2.29 2.54 2.79 0 15 20.32 7.4 0.40 0.48 2.39 2.54 8 14 7 1 p 3 1 1 b d e e z b la a c e p-dip14-6.3x19.2-2.54 0.97g mass[typ.] dp-14av prdp0014ab-b renesas code jeita package code previous code 1.42 0.15 1.27 7.50 8.00 0.40 0.34 a 1 10.5 max nom min dimension in millimeters symbol reference 2.20 0.90 0.70 0.50 5.50 0.20 0.10 0.00 0.46 0.25 0.20 0.15 7.80 8 0 0.12 1.15 10.06 l 1 z h e y x c b p a 2 e d b 1 c 1 e l a index mark e 1 * 2 * 1 7 14 8 f * 3 p m x y d e h z b a p terminal cross section ( ni/pd/au plating ) b c detail f 1 1 l l a note) 1. dimensions" * 1 (nom)"and" * 2" do not include mold flash. 2. dimension" * 3"does not include trim offset. e p-sop14-5.5x10.06-1.27 0.23g mass[typ.] fp-14dav prsp0014df-b renesas code jeita package code previous code
ha17324a series rev.4.00 mar 10, 2006 page 7 of 7 14 8 7 f * 1 * 2 * 3 p m x y 1 e index mark b a z h e d terminal cross section ( ni/pd/au plating ) p b c 1 1 detail f l l a a l e e c 1 b 1 d e a 2 b p c x y h e z l 1 8.65 1.08 0.25 0 8 6.10 0.15 0.20 0.25 0.46 0.10 0.14 0.25 3.95 0.40 0.60 1.27 1.75 reference symbol dimension in millimeters min nom max 9.05 a 1 0.34 0.40 6.20 5.80 1.27 0.15 0.635 note) 1. dimensions" * 1 (nom)"and" * 2" do not include mold flash. 2. dimension" * 3"does not include trim offset. p-sop14-3.95x8.65-1.27 0.13g mass[typ.] fp-14dnv prsp0014de-a renesas code jeita package code previous code 0.83 0.10 0.65 6.20 6.60 0.20 0.15 a 1 5.30 max nom min dimension in millimeters symbol reference 1.10 0.6 0.5 0.4 4.40 0.10 0.07 0.03 0.25 0.20 0.15 0.10 6.40 8 0 0.13 1.0 5.00 l 1 z h e y x c b p a 2 e d b 1 c 1 e e l a index mark f * 1 * 2 * 3 p m x y 1 e 7 14 8 b z e h d a p terminal cross section ( ni/pd/au plating ) b c 1 1 detail f a l l note) 1. dimensions" * 1 (nom)"and" * 2" do not include mold flash. 2. dimension" * 3"does not include trim offset. p-tssop14-4.4x5-0.65 0.05g mass[typ.] ttp-14dv ptsp0014ja-b renesas code jeita package code previous code
keep safety first in your circuit designs! 1. renesas technology corp. puts the maximum effort into making semiconductor products better and more reliable, but there is a lways the possibility that trouble may occur with them. trouble with semiconductors may lead to personal injury, fire or property damage. remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i) placeme nt of substitutive, auxiliary circuits, (ii) use of nonflammable material or (iii) prevention against any malfunction or mishap. notes regarding these materials 1. these materials are intended as a reference to assist our customers in the selection of the renesas technology corp. product best suited to the customer's application; they do not convey any license under any intellectual property rights, or any other rights, belonging to renesas t echnology corp. or a third party. 2. renesas technology corp. assumes no responsibility for any damage, or infringement of any third-party's rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. 3. all information contained in these materials, including product data, diagrams, charts, programs and algorithms represents i nformation on products at the time of publication of these materials, and are subject to change by renesas technology corp. without notice due to product improvement s or other reasons. it is therefore recommended that customers contact renesas technology corp. or an authorized renesas technology corp. product distrib utor for the latest product information before purchasing a product listed herein. the information described here may contain technical inaccuracies or typographical errors. renesas technology corp. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies o r errors. please also pay attention to information published by renesas technology corp. by various means, including the renesas techn ology corp. semiconductor home page (http://www.renesas.com). 4. when using any or all of the information contained in these materials, including product data, diagrams, charts, programs, a nd algorithms, please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. renesas technology corp. assumes no responsibility for any damage, liability or other loss resulting from the information contained herein. 5. renesas technology corp. semiconductors are not designed or manufactured for use in a device or system that is used under ci rcumstances in which human life is potentially at stake. please contact renesas technology corp. or an authorized renesas technology corp. product distributor when considering the use of a product contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerosp ace, nuclear, or undersea repeater use. 6. the prior written approval of renesas technology corp. is necessary to reprint or reproduce in whole or in part these materi als. 7. if these products or technologies are subject to the japanese export control restrictions, they must be exported under a lic ense from the japanese government and cannot be imported into a country other than the approved destination. any diversion or reexport contrary to the export control laws and regulations of japan and/or the country of destination is prohibited. 8. please contact renesas technology corp. for further details on these materials or the products contained therein. sales strategic planning div. nippon bldg., 2-6-2, ohte-machi, chiyoda-ku, tokyo 100-0004, japan http://www.renesas.com refer to " http://www.renesas.com/en/network " for the latest and detailed information. renesas technology america, inc. 450 holger way, san jose, ca 95134-1368, u.s.a tel: <1> (408) 382-7500, fax: <1> (408) 382-7501 renesas technology europe limited dukes meadow, millboard road, bourne end, buckinghamshire, sl8 5fh, u.k. tel: <44> (1628) 585-100, fax: <44> (1628) 585-900 renesas technology (shanghai) co., ltd. unit 204, 205, aziacenter, no.1233 lujiazui ring rd, pudong district, shanghai, china 200120 tel: <86> (21) 5877-1818, fax: <86> (21) 6887-7898 renesas technology hong kong ltd. 7th floor, north tower, world finance centre, harbour city, 1 canton road, tsimshatsui, kowloon, hong kong tel: <852> 2265-6688, fax: <852> 2730-6071 renesas technology taiwan co., ltd. 10th floor, no.99, fushing north road, taipei, taiwan tel: <886> (2) 2715-2888, fax: <886> (2) 2713-2999 renesas technology singapore pte. ltd. 1 harbour front avenue, #06-10, keppel bay tower, singapore 098632 tel: <65> 6213-0200, fax: <65> 6278-8001 renesas technology korea co., ltd. kukje center bldg. 18th fl., 191, 2-ka, hangang-ro, yongsan-ku, seoul 140-702, korea tel: <82> (2) 796-3115, fax: <82> (2) 796-2145 renesas technology malaysia sdn. bhd unit 906, block b, menara amcorp, amcorp trade centre, no.18, jalan persiaran barat, 46050 petaling jaya, selangor darul ehsan, malaysia tel: <603> 7955-9390, fax: <603> 7955-9510 renesas sales offices ? 200 6. re nesas technology corp ., all rights reser v ed. printed in ja pan. colophon .6.0
|
